Welcome to my stop on the Dryad Blog Hop!
I am so excited to share a tutorial with you all for my newest quilt using Shannon’s line, Dryad! I met Shannon at Quilt Market last October, and I fell in love with Dryad. The colors are bold and vibrant and earthy, and some of the prints have some subtle metallic details. Shannon is also super awesome and so easy to chat with! When she asked me if I wanted to make a project with Dryad for her blog hop, of course I said yes! Fabri-Quilt sent me a Snack Pack, which contains 42-2 1/2″ wide strips of fabric. It also has a handy swatch chart on the back so you can preview the fabrics and know how many of each print are included in the pack.
I have four favorite prints (because I couldn’t pick just one). First is the main print in the cool greens, which contains bits and pieces of each prints in that colorway. The print is reminiscent of Shannon’s Scrappy Bits Applique style, which I think works really really well with the collection. It adds a lot of visual interest and pops of color to the pieces.
Next is the bright orange print I nicknamed branchlers, because they look like branches and antlers. The orange in person is the PERFECT hue of orange. Orange can be a hard color to pull off, and Shannon nailed it. NAILED IT. Also, kiddo loves it too!
The next is the text print. The text is a Robert Frost poem “Into My Own” written in Shannon’s own handwriting. At first glance the fabric looks black, but it’s really a rich deep indigo blue that sets off perfectly with the other fabrics in the line and would compliment a lot of what’s already in my stash.
Next is the leaf print with metallic accents. I couldn’t pick between the gold and green at first, but the gold won out. It makes good almost neutral compliment to all of the other fabrics and I can see myself using it in other projects as well.
Now, I am always trying to stretch my creativity when it comes to precut fabrics. I wanted to make something simple, but that so did not happen. I had a brainstorm and ran with it, and the result is a full tutorial that uses almost all of the fabrics included in the Snack Pack. The quilt can be made by either a very patient, confident beginner, or an intermediate/advanced quilter. There are two options and you can just continue with whichever option you choose, it’s very streamlined! I added a metallic ivory print from my stash, and a blue binding fabric that looked like water ripples.
Greeting from ~Enchanted Forest~
I really wanted to have the idea of leaves, and at first I was just going to cut out leaf shapes from my strip sets. Then I started thinking more about the name, Dryad, and how they are mythical creatures that you would probably find in an enchanted forest full of sunlight and unicorns. I thought to myself “If I were in an enchanted forest, I would expect it to sparkle and shine” and the idea of the 3D curved diamonds came to life. The curve of the diamonds create the leafy shape I wanted, but with an added level of sparkle. They are the magic in the forest, the sunshine through the trees, and a perfect skill builder!
I just love how Enchanted Forest turned out, and once I got going I finished in a single day. The top anyways. For quilting, I chose to double up a polycotton blend that was much too thin on its own, and then quilted it in simple straight lines that paralleled the direction of the strips. The result is a lofty warm toddler size quilt. Kiddo simple ADORES the color orange and has already confiscated this quilt. Wish me luck getting this one back to show off at Guild!
Now, before the tutorial begins, here is all the information you need to follow along with the rest of the hop and enter to win some great prizes!
For a chance to win a bundle of Dryad, sign up to follow Fabri-Quilt’s blog, Inspired by Fabric. Then leave a comment here letting me know that you are signed up! The giveaway is open until Feb 15th at 10pm Pacific Time! Winners will be randomly chosen after the blog hop ends. You can enter to win from each blog too! Isn’t that awesome! Make sure to go check them out, there are a ton of great tutorials and projects to be had. Also, Angela Walters is offering 10% off of Dryad fabrics from her shop, Quilting is My Therapy, during the hop using the promo code DRYAD. Fabri-Quilt just launched an Instagram account, so be sure to share your own Dryad posts with them! C&T is giving one lucky hopper a copy of Shannon’s book, Scrappy Bits Appliqué, and Aurifil will also be promoting Shannon’s coordinating thread line. So much great stuff happening!
And the winner is Comment #65!
chanzy01 who said”This has got to be my favorite stop on the hop so far. I’ve saved, bookmarked and pinned it so there is no chance I can loose it. I already follow Fabric Quilt and their Inspired By Fabric Blog.” Thank you chanzy01, and enjoy your fabric
2/2 Shannon Brinkley @ Bottle Tree
2/4 Angela Walters @ Quilting Is My Therapy
2/8 Casey York @ Studiolo
2/9 C&T Publishing
2/10 Rebecca Bryan @ Bryan House Quilts
2/11 Stacey Day @ Stacey in Stitches
2/12 Kristi Schroeder @ Initial K Studio
Enchanted Forest Quilt: A Tutorial in Two Skill Levels
Finished size: 48″x 64″
Finished Block: 8″x 8″
1 Dryad Snack Pack (42- 2 1/2″ strips)
1 1/2 yards metallic low volume ivory [3/4 yard for beginner]
1/2 yard blue for binding
3 1/4 yards backing
56″x 72″ piece of batting
From the metallic ivory cut:
(18) 8 1/2″ squares [12 only for beginner]
(10) 4 1/2″x 8 1/2″ rectangles for advanced only
(4) 4 1/2″squares for advanced only
From the blue cut:
(6) 2 1/4″x WOF strips
Block Instructions- Both Skill Levels
Note: To see a photo or illustration larger or in more detail, click on the image and it will open that image full screen.
1. Remove and discard (2) strips from the Dryad Snack pack. Take the remaining (40) strips and randomly sew them together into pairs. Press the seams to one side, and then sew the pairs together to make (10) strip sets 8 1/2″ wide. Press in the same direction.
2. Cut the strip sets into (48) 8 1/2″ squares. You will be able to get (5) squares from a strip set.
3. Lay out the 8 1/2″ pieced squares into sets of (4), rotating the squares as shown so that the strips travel in two different directions. These pieced squares will be sewn together to make a large block with the 3-D shape in the center.
4. Take an 8 1/2″ ivory square and fold it in half wrong sides together (WST). Pin it to the right side of the first pieced square as shown, so that the raw edges match in the corner of the pieces square, and the fold is to the inside of the block. Place the second pieces square right sides together (RST) on top. Sew the pieces together down the side with the fold. Do not press yet.
5. Fold the block out of the way along the seam, so that the folded ivory piece is free. Pin and sew the other side of the folded ivory piece to a second set of pieced squares, in the same manner as before, making sure that the pieced squares are oriented as shown. Do not press yet.
6. Open the block and lay it flat, to check that the strips of the pieced squares are oriented correctly.
7. Place the two pairs of blocks right sides together, matching the side of the seam allowance with the folded ivory piece together. Finger press the seam allowances in opposite directions so that the seam nests together carefully. Make sure that the fold of the ivory piece is not caught up in the square. CLICK HERE for a handy video tutorial for this step! When you open the block it will look like this:
8. From the wrong side, gently open the seam allowance of the first two seams at the center of the block, so that the seams all spin in the same direction. Press the block flat.
9. Repeat steps 4- 8 with the remaining 8 1/2″ pieced squares, to make (12) diamond blocks total. Trim and square the blocks to 16 1/2″.
10. Take one of the 16 1/2″ diamond blocks and place it right side up on your ironing board. Gently fold one the side of the diamond in towards the center, until the side form a concave curve, usually about 1/4″-3/8″ fold will achieve this. Press the side to set the curve. Repeat for the remaining sides and the remaining diamond blocks.
11. Using a matching thread for each block, topstitch right next to the fold as shown, on the inside of the diamond, backstitching at the start and stop of the seam. Trim the threads or pull them to the back of the block to hide them.
Assembling the Quilt Top -Beginner Quilt
This section is for the beginner quilt. After completing Beginner step 10, scroll down to “Finishing the Quilt”. Skip this section if you wish to complete the Advanced quilt.
10. Sew the finished blocks together into (4) rows with (3) blocks in each row, matching the seam allowances. Press the even rows left and the odd rows right.
11. Sew the rows together, matching the seam allowances. Press the entire quilt top. The finished top will look like this:
Assembling the Quilt Top – Advanced Quilt
Alrighty folks, this is where the steps get a bit strange, but stay with me! You can already make the 3D Diamonds, so adding them into the rows just takes a little patience and longer seams. The corner curves are super easy, and the 3D geese are simple as well. Also, lots of pictures!
10. Take one of the 4 1/2″ ivory squares and fold it in WST. Pin it to the right side in the corner of a diamond block and then baste in in place. Turn the fold back like you did for the diamonds, and topstitch in place. Repeat for the remaining 4 1/2″ ivory squares and three more diamond blocks. This makes (4) corner blocks.
11. Take one of the 4 1/2″x 8 1/2″ ivory rectangles and fold it in half lengthwise WST. Pin it as shown on the right side of a corner block. Take an 8 1/2″ ivory square and fold it WST. Pin it in place as shown in the opposite corner of the same corner block.
12. Place a regular diamond block RST on top of the corner block and sew them together down the side with the folded rectangles. Press the seam allowance right and open the blocks flat.
13. Place a folded ivory rectangle and square on the regular diamond block the same as you did for the corner block, and pin them in place. Place a corner block RST on top, so that the curved square of the corner block is aligned as shown. Sew down the side. Open and press the seam allowance to the right. This is the top row.
14. Take (2) regular diamond blocks and pin a folded ivory rectangles in the top corner of each as shown. These will be the side blocks of the next row.
So far so good! This is where we will construct the 3D blocks that are between the rows. The technique is exactly the same as creating the regular diamond blocks, there is just some prep that needs to be done for each before sewing to set up the next set of 3D pieces in the rows below. The pieces tend to get a bit bulky as each diamond block is added and the rows are constructed, so take your time and use pins.
15. Take the left side block and place a folded ivory square in the bottom corner as shown. Using a pin or a removable marking pen, mark the opposite corner with the X. This is the corner that will be lined up with the other side of the first folded ivory square in the first row.
16. Take the first row and fold it back along the first seam allowance, like you did when constructing the diamond blocks. This will free up the folded ivory square and make it easier to sew the second set of blocks to it.
17. Match the raw edges of the left side block with the raw edges of the first folded ivory square in the first row. Pin, and then place a regular diamond block, now referred to as the center block, on the other side of the folded ivory square, RST with the side block. Sew down the side with the folded ivory square, as you did when constructing the diamond blocks. Open and press the seam allowance to the right.
18. Take the right side block and and place a folded ivory square in the bottom corner as shown. Using a pin or a removable marking pen, mark the opposite corner with the X. This is the corner that will be lined up with the other side of the second folded ivory square in the first row.
19. Match the raw edges of the right side block with the raw edges of the second folded ivory square in the first row. Pin, and then line up the center block on top of the other side of the folded ivory square, RST with the side block. Sew down the side with the folded ivory square. Open and press the seam allowance to the right.
Open the piece, and it will look something like this:
20. Place the two rows right sides together and pin at the seam allowances, adjusting and pinning the ivory pieces the same as when you made the diamond blocks. Sew the two rows together, open, and press towards the second row. It should look like this when you are finished:
21. Prep a second set of side blocks. Sew the blocks of the third row EXACTLY the same as you did for the second row.
23. Take the last two corner blocks and pin the final folded ivory rectangles to them as shown.
24. Using the prepped corner blocks and the remaining diamond block, sew the last row the same as the second and third rows. Press the top well, then baste the open raw edges down to the edges of the quilt top. Fold and press all of the newly formed 3D diamond and geese shapes. Topstitch them down the exact same way you did with the original diamond blocks.
Did you make it through? Then give yourselves a pat on the pack and a chocolate bar, you earned it! It’s smooth sailing from this point!
Finishing the Quilt- Both Skill Levels
Give your quilt top a final press. Piece together the backing so that it measures about 56″x 72″ (you can make it smaller, but since I work on a longarm I like to have the extra wiggle room just in case) and then layer and baste the top, batting and backing. Quilt as desired! I used parallel straight lines and left the centers black, but there is a ton of potential for custom quilting in the strips and in the 3D shapes as well. Piece together the binding strips using a diagonal seam, and then attach the binding to the quilt. Sew on a label, take lots of pretty pictures, and enjoy!
Phew! We made it through! I hope you enjoyed my stop on the hop, and if you have any questions when making your own Enchanted Forest quilt, email me or pop a question in the comments and I will help out as best I can.
When you’re done, tag me on Instagram @staceyinstitches or email me a picture of the finished quilt, I love to see what you make!
Until next time,
100 thoughts on “Dryad Blog Hop-* Winner Drawn!”
Very nice i have done this block but wow love the stripes idea…tytyty again for sharing….I have 30 of the strips made out of left overs now i can add pop..lol…… email@example.com
What a great idea! Haven’t seen this technique in many years; you’ve brought it back and made it modern in such gorgeous fabric. I follow Inspired by Fabric in 2 ways: bloglovin’ and by email. 😉
I am on the Inspired by Fabric e-mail list and am really enjoying all the different ideas for using Dryad. Thanks for the great pattern!
What a clever idea! I love scrappy quilts and this method is on my bucket list now. Must give it a try! I follow Inspired by Fabric which is how I found you today. I’m thrilled to meet you!
Amazing. Thanks for the tutorial, I look forward to trying it. All signed up btw.
I have already signed up to follow Fabri-Quilt. Love this quilt tutorial! Nice job.
Stacey, whow you are “high octane” too, your tutorials are aces and so easy to follow……….I love orange so I’m drawn to “Branchiers” and other warms so I do adore the gold leaves too.
Thank you so much for sharing.
I just signed up for Inspired by Fabric and would love to play with this new line of fabric!!
Beautiful quilt – you are so talented.
I follow Inspired by Fabrics on Bloglovin.
I love how your quilt turned out….very clever with the turned edges to make petals! I follow Inspired by Fabric via Bloglovin.
I’m signed up! Thanks!
Pretty quilt! I follow Inspired by Fabric via email. Thanks for sharing.
I have Pinned your tutorial because I don’t want to lose track of such an unusual and lovely quilt! I follow Inspired by Fabric via email. Thanks for being part of the blog hop.
i follow Inspired by Fabric through email
This has got to be my favorite stop on the hop so far. I’ve saved, bookmarked and pinned it so there is no chance I can loose it. I already follow Fabric Quilt and their Inspired By Fabric Blog.
Great tutorial! I follow Inspired By Fabric by email.
Your quilt is Awesome! Love these fabrics too! Thanks for chance to win your Giveaway too. 🙂
I’m already a Follower of Inspired by Fabric too…
I love the visual effect of your quilt. I enjoy making 3-D bow tie quilts. I follow by email.
Already follow them
I love seeing all the different ideas for this fabric. They look beautiful all together in strip blocks and I love the rounded ‘bagel’ look! Nice pattern. I’m signed up. 🙂
I love your quilt and I really appreciated the story of your thinking as you designed it. Thanks for this wonderful post. I follow Inspired by Fabric. Thanks again!
Hi Stacey, your quilt design is beautiful, I’m so excited to participate in this blog tour, I’m signed up Fabri-Quilt’s blog, Inspired by Fabric – enjoy the weekend
Your quilt turned out wonderful. Great tutorial.
I am signed up to follow Inspired by Fabric blog. What a fun and interesting technique. Your quilt is beautiful with so much movement. The pretty fabric is showcased so well in this design.
I am signed up to follow Inspired by Fabric’s blog. I love the technique and how well your design showcases the pretty fabrics. Wonderful idea.
Wow, that looks amazing. I am following inspired by fabric via blog lovin
I have signed up with fabric inspiration, and that is how I found you! Lovely quilt!
I follow Inspired by Fabric by email
I follow them by bloglovin. I love this quilt! Thanks so much for the tutorial. 😊
I’m signed up, thank you for the beautiful tutorial!!!
What a beautiful quilt! Thanks so much for the tutorial – I definitely want to try this, I follow Inspired by Fabric via Bloglovin.
I’m signed up. Great quilt you designed. Love this fabric!
Wow, this is gorgeous! Thanks for the wonderful tutorial. I’m signed up 🙂
Love how you got the curved effect by placing the diamond shapes over the pieced blocks – genius! I follow Inspired by Fabric with Bloglovin.
I signed up to follow. Love the fabric.
Thank you for your wonderfully detailed tutorial! It’s inspiring to be reminded of what can be accomplished with a package of fabric strips!!!
I do follow the Inspired by Fabric email blog.
I have been a follower of IbF for quite a while. I enjoy the blog. You’ve made a really nice quilt. I love to read the mind process for deciding the how, what and why of a quilt. Thanks for the tut.
another beautiful quilt using beautiful fabrics by a very talented and beautiful young lady , keep up the good work!!
I follow Inspired by Fabric via bloglovin. Love this collection. Thanks for the opportunity to win! and your tutorial is awesome. Thanks for sharing.
I’m signed up to follow Inspired by Fabrics Blog. thanks for the chance to own some awesome fabric. And your quilts are great also…..
I am signed up. Love your use of the fabrics
love your quilt a very clever combo. i follow inspired on blog lovin, thanks for the chance to win.
Love the colors here and the diamond in the middle.
I love the various skill level options! I follow via Bloglovin!
I love your quilt! I follow Inspired by Fabric via email.
Congratulations to Chanzy01…enjoy your goodies!
This is a beautiful quilt! I love how you made the tutorial for two different skill levels. Very genius!
Thank you Julie!!